China titanium piping solution supplier: www.titaniuminfogroup.com

Pipe Nipple

Size: 1/2"-48"
Wall thickness: SCH5S-SCHXXS
Material: Special Alloy, Super Duplex Stainless Steel, Stainless Steel, Carbon Steel, Titanium
Standards: ASME B16.9, ASME B16.28, MSS SP43, MSS SP75

  • PRODUCT DETAIL
  • Material

pipe nipple is a fitting, consisting of a short piece of pipe, usually provided with a male pipe thread at each end, for connecting two other fittings.

The length of the pipe nipple is usually specified by the overall length with threads. It may have a hexagonal section in the center for wrench to grasp (sometimes referred to as a “hex nipple”), or it may simply be made from a short piece of pipe (sometimes referred to as a “barrel nipple” or “pipe nipple”). A “close nipple” has no unthreaded area; when screwed tightly between two female fittings, very little of the nipple remains exposed. A close nipple can only be unscrewed by gripping one threaded end with a pipe wrench which will damage the threads and necessitate replacing the nipple, or by using a specialty tool known as a nipple wrench (or known as an internal pipe wrench) which grips the inside of the pipe, leaving the threads undamaged. When the ends are of two different sizes it is called a reducer or unequal nipple.

Threads used on pipe nipples are BSPBSPTNPT, NPSM and Metric.

Titanium information group has 3 warehouses in Wenzhou, Wuxi and Hebei. As one of the piping solution providers, Titanium information group has been committed to providing one-stop solutions for projects in the fields of oil and gas, water, renewable energy and infrastructure. With years’ consistent dedication and innovation, our reliable, cost-effective and environment-friendly solutions have won clients’ wide recognition.
China Pipe Nipples manufacturer Titanium information group supplies Pipe Nipples in kinds of materials such as carbon steel, stainless steel, alloy steel, titanium, brass, aluminum, etc.

Types Of Pipe Nipples and Their Uses

But no matter what the basis for the word, it is now in common use in plumbing. And what’s more, there are several different types/subsets of pipe nipples to contend with.

  • Barrel nipple: This is a type of a short tubular with a taper thread outside at each end and which is un-threaded in the middle.
  • Weld nipple: Weld nipple is used as another method of connecting tube fittings. These kind of nipples are suitable for use under extreme conditions of vibration, pressure surges and changes of temperature.
  • Swage nipple: The basic purpose of a swage nipple is to bringing the flow of fluids from one pipe size to another. These are available with plain, beveled or threaded ends.
  • Hexagon nipple: Hexagon nipples are available in a variety of threads, materials and lengths.

Nipple Pics - Pipe Nipple

I’m sure there are more, but we’ll stick with those for now.

In its most basic form, a nipple is a short length of pipe with male pipe threads at both ends for connecting other fittings. You may also see them referred to as “barrel nipples”. Generally speaking, there is a short distance of unthreaded pipe between the two threaded ends, depending on how far apart you need the attached fittings to be.

When there is no bare pipe (read “unthreaded”) between the two connecting ends, the part may be called a “close nipple” or a “running nipple”. In that case, connected fittings come close to touching one another and very little of the nipple can be seen.

Although some constructions require such tight placement, close nipples can be difficult to work with, since unscrewing them requires holding tight to part of the threaded area. That can damage the threads. Plumbers who need to use them often invest in an internal pipe wrench (also known as a “nipple wrench”), which expands inside the pipe to hold it in place without damaging the threads.

In cases where you can spare a little space between threaded ends, you can use a “hexagonal nipple”, which has a hexagonal section in the middle. It functions like a nut that can be gripped by a normal wrench, providing a greater mechanical advantage than normal rounded pipe. A hexagonal nipple with more distance between the threaded ends is called, no surprise, a “long hex nipple”.

For projects which require a change in pipe dimension, you can buy a “reducing nipple.” Sometimes called an “unequal nipple”, it takes a female fitting with a larger connection and attaches it to a smaller one. Care should be taken when using these parts since a reduction in pipe diameter can mean more pressure and greater flow rate in the smaller pipe/fitting. The nipple usually has a hexagonal center, although not always.

There is a specialty nipple called a “hose nipple” for processes which require connection to tubing. That fitting features a male threaded connection on one end and a hose barb on the other. The hose barb may be the same size as the pipe connection or it may be reduced.

The final variant we will talk about is the “welding nipple,” which has a threaded connection on one end and normal cut pipe at the other. As the name implies, this part is designed to be welded to piping, a fitting or a tank. The unthreaded end of the pipe provides more surface area for the use of solder or other welding materials to make the connection stronger. The benefit of the welding nipple is that once the unthreaded end is connected, you can connect pipes or other fittings to the threaded end much more easily.

Carbon Steel Pipe Nipples

Seamless Pipe Nipples – ASTM – A-106, Grade B
  • 1/8” – 6” Diameters
  • Seamless – Black and Galvanized
  • Standard (Schedules 40, 80, 160 & XXH)
  • Custom Threads, British Pipe, Dry Seal, Straight-Running, Etc.
Carbon Steel Pipe Nipples – Domestic, Black, Welded
  • Black, Schedule 40 (Standard)
  • Black, Schedule 80 (Extra Heavy)
  • Galvanized, Schedule 40 (Standard)
  • Galvanized, Schedule 80 (Extra Heavy)
  • Ready Cut Pipe
  • Six Pack Assortments
Carbon Steel Pipe Nipples – Imported, Thread-Rite, Black, Welded
  • Black, Schedule 40 (Standard)
  • Black, Schedule 80 (Extra Heavy)
  • Galvanized, Schedule 40 (Standard)
  • Ready Cut Pipe
  • Six Pack Assortments

Brass Pipe Nipples – Red Brass Pipe Nipples
  • Standard – Schedules 40
  • Extra Heavy – Schedule 80
  • Chrome Plated Brass Pipe Nipples
  • 1/8” – 4” Diameter
  • Custom Threads, British Pipe, Dry Seal, Straight-Running, Etc. Available, POA.
  • Brass Pipe Available in 12′ Lengths
catlog brass pipe nipples - Pipe Nipple
Brass Pipe Nipple Sizes:
1/8” X 1 ½” 1/4″ X 1 ½” 3/8” X 1 ½”
½” X 1 ½” 3/4″ X 1 ½” 1/8” X 2”
1/4″ X 2 3/8” X 2” ½” X 2”
3/4″ X 2” 1” X 2” 1 ¼” X 2”
1 1/2” X 2” 1/8” X 2 1/2” 1/4″ X 2 1/2”
3/8” X 2 1/2” ½” X 2 1/2” 3/4″ X 2 1/2”
1” X 2 1/2” 1 ¼” X 2 1/2” 1 1/2″ X 2 1/2”
2” X 2 1/2” 1/8” X 3” 1/4″ X 3”
3/8” X 3” ½” X 3” 3/4″ X 3”
1” X 3” 1 ¼” X 3” 1 1/2″ X 3”
2” X 3” 2 1/2″ X 3” 3” X 3”
1/8” X 3 1/2” 1/4″ X 3 1/2” 3/8” X 3 1/2”
½” X 3 1/2” 3/4″ X 3 1/2” 1” X 3 1/2”
1 ¼” X 3 1/2” 1 1/2″ X 3 1/2” 2” X 3 1/2”
2 1/2″ X 3 1/2” 3″ X 3 1/2” 1/8” X 4”
1/4″ X 4” 3/8” X 4” ½” X 4”
3/4″ X 4” 1” X 4” 1 ¼” X 4”
1 1/2″ X 4” 2” X 4” 2 1/2″ X 4”
3″ X 4” 3 ½” X 4” 4″ X 4”
5″ X 4” 6″ X 4” 1/8” X 4 1/2”
1/4″ X 4 1/2” 3/8” X 4 1/2” ½” X 4 1/2”
3/4″ X 4 1/2”  1” X 4 1/2 1 ¼” X 4 1/2”
1 1/2″ X 4 1/2” 2” X 4 1/2” 2 1/2″ X 4 1/2”
3″ X 4 1/2” 4″ X 4 1/2” 5” X 4 ½”
6” X 4 ½” 1/8” X 5” 1/4″ X 5”
3/8” X 5” ½” X 5” 3/4″ X 5”
1” X 5” 1 ¼” X 5” 1 1/2″ X 5”
2” X 5” 2 1/2″ X 5” 3″ X 5”
4″ X 5” 5” X 5” 6” X 5”
1/8” X 5 1/2” 1/4″ X 5 1/2” 3/8” X 5 1/2”
½” X 5 1/2” 3/4″ X 5 1/2” 1” X 5 1/2”
1 ¼” X 5 1/2” 1 1/2″ X 5 1/2” 2” X 5 1/2”
2 1/2″ X 5 1/2” 3″ X 5 1/2” 4″ X 5 1/2”
5” X 5 ½” 6” X 5 1/2” 1/8” X 6”
1/4″ X 6” 3/8” X 6” ½” X 6”
3/4″ X 6” 1” X 6” 1 ¼” X 6”
1 1/2″ X 6” 2” X 6” 2 1/2″ X 6”
3″ X 6” 4″ X 6” 5” X 6”
6” X 6” 1/8” X 7” 1/4″ X 7”
3/8” X 7” ½” X 7” 3/4″ X 7”
 1” X 7” 1 ¼” X 7” 1 1/2″ X 7”
2” X 7” 2 1/2″ X 7” 3″ X 7”
4″ X 7” 5” X 7” 6” X 7”
1/8” X 8” 1/4″ X 8” 3/8” X 8”
½” X 8” 3/4″ X 8” 1” X 8”
1 ¼” X 8” 1 1/2″ X 8” 2” X 8”
2 1/2″ X 8” 3″ X 8” 4″ X 8”
5” X 8” 6” X 8” 1/8” X 9”
1/4″ X 9” 3/8” X 9” ½” X 9”
3/4″ X 9” 1” X 9” 1 ¼” X 9”
1 1/2″ X 9” 2” X 9” 2 1/2″ X 9”
3″ X 9” 4″ X 9” 5” X 9”
6” X 9” 1/8” X 10” 1/4″ X 10”
3/8” X 10” ½” X 10” 3/4″ X 10”
1” X 10” 1 ¼” X 10” 1 1/2″ X 10”
2” X 10” 2 1/2″ X 10” 3″ X 10”
4″ X 10” 5” X 10” 6” X 10”
1/8” X 11” 1/4″ X 11” 3/8” X 11”
½” X 11” 3/4″ X 11” 1” X 11”
1 ¼” X 11” 1 1/2″ X 11” 2” X 11”
2 1/2″ X 11” 3″ X 11” 4″ X 11”
5” X 11” 6” X 11” 1/8” X 12”
1/4″ X 12” 3/8” X 12” ½” X 12”
3/4″ X 12” 1” X 12” 1 ¼” X 12”
1 1/2″ X 12” 2” X 12” 2 1/2″ X 12”
3″ X 12” 4″ X 12” 5” X 12”
6” X 12”    

Aluminum Pipe Nipples
  • 6061-T6
  • Schedule 40, Schedule 80
  • Custom Threads, British Pipe, Dry Seal, Straight-Running, Etc. Available, POA.
  • Plain End Pipe Available
  • 1/8” – 6” Diameters
aluminium img - Pipe Nipple
Aluminum Pipe Nipple Sizes:
1/8” X 1 ½” 1/4″ X 1 ½” 3/8” X 1 ½”
½” X 1 ½” 3/4″ X 1 ½” 1/8” X 2”
1/4″ X 2 3/8” X 2” ½” X 2”
3/4″ X 2” 1” X 2” 1 ¼” X 2”
1 1/2” X 2” 1/8” X 2 1/2” 1/4″ X 2 1/2”
3/8” X 2 1/2” ½” X 2 1/2” 3/4″ X 2 1/2”
1” X 2 1/2” 1 ¼” X 2 1/2” 1 1/2″ X 2 1/2”
2” X 2 1/2” 1/8” X 3” 1/4″ X 3”
3/8” X 3” ½” X 3” 3/4″ X 3”
1” X 3” 1 ¼” X 3” 1 1/2″ X 3”
2” X 3” 2 1/2″ X 3” 3” X 3”
1/8” X 3 1/2” 1/4″ X 3 1/2” 3/8” X 3 1/2”
½” X 3 1/2” 3/4″ X 3 1/2” 1” X 3 1/2”
1 ¼” X 3 1/2” 1 1/2″ X 3 1/2” 2” X 3 1/2”
2 1/2″ X 3 1/2” 3″ X 3 1/2” 1/8” X 4”
1/4″ X 4” 3/8” X 4” ½” X 4”
3/4″ X 4” 1” X 4” 1 ¼” X 4”
1 1/2″ X 4” 2” X 4” 2 1/2″ X 4”
3″ X 4” 3 ½” X 4” 4″ X 4”
5″ X 4” 6″ X 4” 1/8” X 4 1/2”
1/4″ X 4 1/2” 3/8” X 4 1/2” ½” X 4 1/2”
3/4″ X 4 1/2”  1” X 4 1/2 1 ¼” X 4 1/2”
1 1/2″ X 4 1/2” 2” X 4 1/2” 2 1/2″ X 4 1/2”
3″ X 4 1/2” 4″ X 4 1/2” 5” X 4 ½”
6” X 4 ½” 1/8” X 5” 1/4″ X 5”
3/8” X 5” ½” X 5” 3/4″ X 5”
1” X 5” 1 ¼” X 5” 1 1/2″ X 5”
2” X 5” 2 1/2″ X 5” 3″ X 5”
4″ X 5” 5” X 5” 6” X 5”
1/8” X 5 1/2” 1/4″ X 5 1/2” 3/8” X 5 1/2”
½” X 5 1/2” 3/4″ X 5 1/2” 1” X 5 1/2”
1 ¼” X 5 1/2” 1 1/2″ X 5 1/2” 2” X 5 1/2”
2 1/2″ X 5 1/2” 3″ X 5 1/2” 4″ X 5 1/2”
5” X 5 ½” 6” X 5 1/2” 1/8” X 6”
1/4″ X 6” 3/8” X 6” ½” X 6”
3/4″ X 6” 1” X 6” 1 ¼” X 6”
1 1/2″ X 6” 2” X 6” 2 1/2″ X 6”
3″ X 6” 4″ X 6” 5” X 6”
6” X 6” 1/8” X 7” 1/4″ X 7”
3/8” X 7” ½” X 7” 3/4″ X 7”
 1” X 7” 1 ¼” X 7” 1 1/2″ X 7”
2” X 7” 2 1/2″ X 7” 3″ X 7”
4″ X 7” 5” X 7” 6” X 7”
1/8” X 8” 1/4″ X 8” 3/8” X 8”
½” X 8” 3/4″ X 8” 1” X 8”
1 ¼” X 8” 1 1/2″ X 8” 2” X 8”
2 1/2″ X 8” 3″ X 8” 4″ X 8”
5” X 8” 6” X 8” 1/8” X 9”
1/4″ X 9” 3/8” X 9” ½” X 9”
3/4″ X 9” 1” X 9” 1 ¼” X 9”
1 1/2″ X 9” 2” X 9” 2 1/2″ X 9”
3″ X 9” 4″ X 9” 5” X 9”
6” X 9” 1/8” X 10” 1/4″ X 10”
3/8” X 10” ½” X 10” 3/4″ X 10”
1” X 10” 1 ¼” X 10” 1 1/2″ X 10”
2” X 10” 2 1/2″ X 10” 3″ X 10”
4″ X 10” 5” X 10” 6” X 10”
1/8” X 11” 1/4″ X 11” 3/8” X 11”
½” X 11” 3/4″ X 11” 1” X 11”
1 ¼” X 11” 1 1/2″ X 11” 2” X 11”
2 1/2″ X 11” 3″ X 11” 4″ X 11”
5” X 11” 6” X 11” 1/8” X 12”
1/4″ X 12” 3/8” X 12” ½” X 12”
3/4″ X 12” 1” X 12” 1 ¼” X 12”
1 1/2″ X 12” 2” X 12” 2 1/2″ X 12”
3″ X 12” 4″ X 12” 5” X 12”
6” X 12”    

Stainless Steel Pipe Nipples – Seamless, Welded
  • 304/304L Stainless Pipe Nipples
  • 316/316L Stainless Pipe Nipples
  • Schedule 40, Schedule 80, Schedule 160, XXH
  • 5” and 6” Diameters Also Available
  • British Pipe Threading Available
stainless steel pipe nipples - Pipe Nipple
304/304L Stainless Steel Pipe Nipple Sizes:
1/8” X 1 ½” 1/4″ X 1 ½” 3/8” X 1 ½”
½” X 1 ½” 3/4″ X 1 ½” 1/8” X 2”
1/4″ X 2 3/8” X 2” ½” X 2”
3/4″ X 2” 1” X 2” 1 ¼” X 2”
1 1/2” X 2” 1/8” X 2 1/2” 1/4″ X 2 1/2”
3/8” X 2 1/2” ½” X 2 1/2” 3/4″ X 2 1/2”
1” X 2 1/2” 1 ¼” X 2 1/2” 1 1/2″ X 2 1/2”
2” X 2 1/2” 1/8” X 3” 1/4″ X 3”
3/8” X 3” ½” X 3” 3/4″ X 3”
1” X 3” 1 ¼” X 3” 1 1/2″ X 3”
2” X 3” 2 1/2″ X 3” 3” X 3”
1/8” X 3 1/2” 1/4″ X 3 1/2” 3/8” X 3 1/2”
½” X 3 1/2” 3/4″ X 3 1/2” 1” X 3 1/2”
1 ¼” X 3 1/2” 1 1/2″ X 3 1/2” 2” X 3 1/2”
2 1/2″ X 3 1/2” 3″ X 3 1/2” 1/8” X 4”
1/4″ X 4” 3/8” X 4” ½” X 4”
3/4″ X 4” 1” X 4” 1 ¼” X 4”
1 1/2″ X 4” 2” X 4” 2 1/2″ X 4”
3″ X 4” 3 ½” X 4” 4″ X 4”
5″ X 4” 6″ X 4” 1/8” X 4 1/2”
1/4″ X 4 1/2” 3/8” X 4 1/2” ½” X 4 1/2”
3/4″ X 4 1/2”  1” X 4 1/2 1 ¼” X 4 1/2”
1 1/2″ X 4 1/2” 2” X 4 1/2” 2 1/2″ X 4 1/2”
3″ X 4 1/2” 4″ X 4 1/2” 5” X 4 ½”
6” X 4 ½” 1/8” X 5” 1/4″ X 5”
3/8” X 5” ½” X 5” 3/4″ X 5”
1” X 5” 1 ¼” X 5” 1 1/2″ X 5”
2” X 5” 2 1/2″ X 5” 3″ X 5”
4″ X 5” 5” X 5” 6” X 5”
1/8” X 5 1/2” 1/4″ X 5 1/2” 3/8” X 5 1/2”
½” X 5 1/2” 3/4″ X 5 1/2” 1” X 5 1/2”
1 ¼” X 5 1/2” 1 1/2″ X 5 1/2” 2” X 5 1/2”
2 1/2″ X 5 1/2” 3″ X 5 1/2” 4″ X 5 1/2”
5” X 5 ½” 6” X 5 1/2” 1/8” X 6”
1/4″ X 6” 3/8” X 6” ½” X 6”
3/4″ X 6” 1” X 6” 1 ¼” X 6”
1 1/2″ X 6” 2” X 6” 2 1/2″ X 6”
3″ X 6” 4″ X 6” 5” X 6”
6” X 6” 1/8” X 7” 1/4″ X 7”
3/8” X 7” ½” X 7” 3/4″ X 7”
 1” X 7” 1 ¼” X 7” 1 1/2″ X 7”
2” X 7” 2 1/2″ X 7” 3″ X 7”
4″ X 7” 5” X 7” 6” X 7”
1/8” X 8” 1/4″ X 8” 3/8” X 8”
½” X 8” 3/4″ X 8” 1” X 8”
1 ¼” X 8” 1 1/2″ X 8” 2” X 8”
2 1/2″ X 8” 3″ X 8” 4″ X 8”
5” X 8” 6” X 8” 1/8” X 9”
1/4″ X 9” 3/8” X 9” ½” X 9”
3/4″ X 9” 1” X 9” 1 ¼” X 9”
1 1/2″ X 9” 2” X 9” 2 1/2″ X 9”
3″ X 9” 4″ X 9” 5” X 9”
6” X 9” 1/8” X 10” 1/4″ X 10”
3/8” X 10” ½” X 10” 3/4″ X 10”
1” X 10” 1 ¼” X 10” 1 1/2″ X 10”
2” X 10” 2 1/2″ X 10” 3″ X 10”
4″ X 10” 5” X 10” 6” X 10”
1/8” X 11” 1/4″ X 11” 3/8” X 11”
½” X 11” 3/4″ X 11” 1” X 11”
1 ¼” X 11” 1 1/2″ X 11” 2” X 11”
2 1/2″ X 11” 3″ X 11” 4″ X 11”
5” X 11” 6” X 11” 1/8” X 12”
1/4″ X 12” 3/8” X 12” ½” X 12”
3/4″ X 12” 1” X 12” 1 ¼” X 12”
1 1/2″ X 12” 2” X 12” 2 1/2″ X 12”
3″ X 12” 4″ X 12”
   
316/316L Stainless Steel Pipe Nipple Sizes:
1/8” X 1 ½” 1/4″ X 1 ½” 3/8” X 1 ½”
½” X 1 ½” 3/4″ X 1 ½” 1/8” X 2”
1/4″ X 2 3/8” X 2” ½” X 2”
3/4″ X 2” 1” X 2” 1 ¼” X 2”
1 1/2” X 2” 1/8” X 2 1/2” 1/4″ X 2 1/2”
3/8” X 2 1/2” ½” X 2 1/2” 3/4″ X 2 1/2”
1” X 2 1/2” 1 ¼” X 2 1/2” 1 1/2″ X 2 1/2”
2” X 2 1/2” 1/8” X 3” 1/4″ X 3”
3/8” X 3” ½” X 3” 3/4″ X 3”
1” X 3” 1 ¼” X 3” 1 1/2″ X 3”
2” X 3” 2 1/2″ X 3” 3” X 3”
1/8” X 3 1/2” 1/4″ X 3 1/2” 3/8” X 3 1/2”
½” X 3 1/2” 3/4″ X 3 1/2” 1” X 3 1/2”
1 ¼” X 3 1/2” 1 1/2″ X 3 1/2” 2” X 3 1/2”
2 1/2″ X 3 1/2” 3″ X 3 1/2” 1/8” X 4”
1/4″ X 4” 3/8” X 4” ½” X 4”
3/4″ X 4” 1” X 4” 1 ¼” X 4”
1 1/2″ X 4” 2” X 4” 2 1/2″ X 4”
3″ X 4” 3 ½” X 4” 4″ X 4”
5″ X 4” 6″ X 4” 1/8” X 4 1/2”
1/4″ X 4 1/2” 3/8” X 4 1/2” ½” X 4 1/2”
3/4″ X 4 1/2”  1” X 4 1/2 1 ¼” X 4 1/2”
1 1/2″ X 4 1/2” 2” X 4 1/2” 2 1/2″ X 4 1/2”
3″ X 4 1/2” 4″ X 4 1/2” 5” X 4 ½”
6” X 4 ½” 1/8” X 5” 1/4″ X 5”
3/8” X 5” ½” X 5” 3/4″ X 5”
1” X 5” 1 ¼” X 5” 1 1/2″ X 5”
2” X 5” 2 1/2″ X 5” 3″ X 5”
4″ X 5” 5” X 5” 6” X 5”
1/8” X 5 1/2” 1/4″ X 5 1/2” 3/8” X 5 1/2”
½” X 5 1/2” 3/4″ X 5 1/2” 1” X 5 1/2”
1 ¼” X 5 1/2” 1 1/2″ X 5 1/2” 2” X 5 1/2”
2 1/2″ X 5 1/2” 3″ X 5 1/2” 4″ X 5 1/2”
5” X 5 ½” 6” X 5 1/2” 1/8” X 6”
1/4″ X 6” 3/8” X 6” ½” X 6”
3/4″ X 6” 1” X 6” 1 ¼” X 6”
1 1/2″ X 6” 2” X 6” 2 1/2″ X 6”
3″ X 6” 4″ X 6” 5” X 6”
6” X 6” 1/8” X 7” 1/4″ X 7”
3/8” X 7” ½” X 7” 3/4″ X 7”
 1” X 7” 1 ¼” X 7” 1 1/2″ X 7”
2” X 7” 2 1/2″ X 7” 3″ X 7”
4″ X 7” 5” X 7” 6” X 7”
1/8” X 8” 1/4″ X 8” 3/8” X 8”
½” X 8” 3/4″ X 8” 1” X 8”
1 ¼” X 8” 1 1/2″ X 8” 2” X 8”
2 1/2″ X 8” 3″ X 8” 4″ X 8”
5” X 8” 6” X 8” 1/8” X 9”
1/4″ X 9” 3/8” X 9” ½” X 9”
3/4″ X 9” 1” X 9” 1 ¼” X 9”
1 1/2″ X 9” 2” X 9” 2 1/2″ X 9”
3″ X 9” 4″ X 9” 5” X 9”
6” X 9” 1/8” X 10” 1/4″ X 10”
3/8” X 10” ½” X 10” 3/4″ X 10”
1” X 10” 1 ¼” X 10” 1 1/2″ X 10”
2” X 10” 2 1/2″ X 10” 3″ X 10”
4″ X 10” 5” X 10” 6” X 10”
1/8” X 11” 1/4″ X 11” 3/8” X 11”
½” X 11” 3/4″ X 11” 1” X 11”
1 ¼” X 11” 1 1/2″ X 11” 2” X 11”
2 1/2″ X 11” 3″ X 11” 4″ X 11”
5” X 11” 6” X 11” 1/8” X 12”
1/4″ X 12” 3/8” X 12” ½” X 12”
3/4″ X 12” 1” X 12” 1 ¼” X 12”
1 1/2″ X 12” 2” X 12” 2 1/2″ X 12”
3″ X 12” 4″ X 12”
   
316 Close Pipe Nipple Sizes:
1/8” X Close, 1/4″ X Close, 3/8” X Close, ½” X Close, 3/4″ X Close, 1” X Close, 1 ¼” X Close, 1 1/2″ X Close, 2” X Close, 2 1/2″ X Close, 3″ X Close, 4″ X Close
Determine the length of “close” nipples needed for your pipe size
Pipe Size 1/8″ 1/4″ 3/8″ 1/2″ 3/4″ 1″ 1 1/4″ 1 1/2″ 2″ 2 1/2″ 3″ 4″
Close Length 3/4″ 7/8″ 1″ 1 1/8″ 1 3/8″ 1 1/2″ 1 5/8″ 1 3/4″ 2″ 2 1/2″ 2 5/8″ 2 7/8″
For example, if the pipe size is 3/8″, then the close length is 1″
Summary
pipe nipple - Pipe Nipple
Aggregate Rating
5 based on 1 votes
Brand Name
Titanium information group
Product Name
Pipe Nipple
Price
USD 1-10000
Product Availability
Pre-Order Only

Material

Special Alloys

  • HASTELLOY® X
  • MONEL® R-405
  • MONEL® K-500
  • HASTELLOY® C-276
  • HASTELLOY® C-22
  • HASTELLOY® B-2
  • INCOLOY® 825
  • INCOLOY® 800H / 800HT®
  • INCONEL® 718
  • INCONEL® ALLOY 625
  • INCONEL® ALLOY 601
  • INCONEL® ALLOY 600
  • MONEL® ALLOY 400

ALLOY 20

  • NICKEL 200/201
  • MONEL® R-405
  • MONEL® K-500
  • MONEL® ALLOY 400
  • INCONEL® 718
  • INCONEL® ALLOY 625
  • INCONEL® ALLOY 601
  • INCONEL® ALLOY 600
  • INCOLOY® 825
  • HASTELLOY® X
  • HASTELLOY® C-276
  • HASTELLOY® C-22
  • HASTELLOY® B-2
  • INCOLOY® 800H / 800HT®
  • HASTELLOY® B-3

Duplex Stainless Steel

  • ZERON® 100, SUPER DUPLEX STAINLESS STEEL
  • Super Duplex S32760
  • LDX 2101®, DUPLEX STEEL
  • Duplex S31803
  • SUPER DUPLEX 2507
  • DUPLEX 2205

Stainless Steel

  • STAINLESS STEEL NITRONIC 50HS
  • STAINLESS STEEL NITRONIC 60
  • STAINLESS STEEL NITRONIC 50
  • STAINLESS STEEL 13-8PH
  • STAINLESS STEEL 15-5PH
  • STAINLESS STEEL PRODEC 303
  • STAINLESS STEEL 303
  • STAINLESS STEEL 446
  • STAINLESS STEEL 410S
  • STAINLESS STEEL 410
  • STAINLESS STEEL 304-304H
  • STAINLESS STEEL 17-4
  • STAINLESS STEEL 347
  • STAINLESS STEEL 440C
  • STAINLESS STEEL 309
  • STAINLESS STEEL 316-316l
  • STAINLESS STEEL AL-6XN®
  • STAINLESS STEEL 330
  • STAINLESS STEEL 321
  • 317L STAINLESS STEEL
  • STAINLESS STEEL 310/310S
  • Stainless Steel 304L
  • Stainless Steel 304
  • STAINLESS STEEL 253 MA

Carbon Steel

  • CARBON STEEL PRODUCTS

Titanium

  • 10V-2Fe-3Al
  • 6Al-4V
  • 6Al-4V STA
  • 6Al-4V ELI
  • 6Al-2Sn-4Zr-2Mo

PREV
NEXT
Inquery now

SUBSCRIBE TO OUR NEWSLETTER

FOLLOW US

YouTube
العربية简体中文繁體中文NederlandsEnglishFrançaisDeutschItaliano日本語한국어LatinPortuguêsРусскийEspañolTürkçe

Email me
Mail to us