China titanium piping solution supplier: www.titaniuminfogroup.com | Email: sales@titaniuminfogroup.comTel: +8618267732328

Titanium information group | Titanium pipe, titanium fitting, titanium valve, titanium flange manufacturer – www.titaniuminfogroup.com

  • Comparative study on milling performance of 3D printed titanium alloy components and titanium alloy forgings

    Comparative study on milling performance of 3D printed titanium alloy components and titanium alloy forgings

    3D-printed titanium alloy, as an emerging material in the aerospace field, has always received great attention in terms of its cutting performance. In this paper, orthogonal milling experiments were conducted on 3D printed titanium alloy components and titanium alloy forgings. The similarities and ...

    Read more

  • Process test to improve the impact toughness of Ti-4Al-1.5Mn titanium alloy small forgings

    Process test to improve the impact toughness of Ti-4Al-1.5Mn titanium alloy small forgings

    Ti-4Al-1.5Mn alloy is a medium strength, high plasticity near-alpha titanium alloy, which has been widely used in the aerospace industry. The recent Ti-4Al-1.5Mn small forgings produced by our company have the problem of insufficient or even unqualified impact toughness in wide varieties and batc ...

    Read more

  • Research on Hot Die Forging Technology of Titanium Alloy Bar

    Research on Hot Die Forging Technology of Titanium Alloy Bar

    We analyzed the advantages of partial loading hot die forging into shape technology, analyzed the mechanical properties and microstructure of the forgings, and concluded that the partial loading method and hot die forging into shape technology could obtain reliable quality titanium alloy produc ...

    Read more

  • Design of forming die for Grade 5 titanium alloy tee

    Design of forming die for Grade 5 titanium alloy tee

    Through the process calculation of Grade 5 titanium alloy tee, a reasonable hot extrusion forming scheme was analyzed and formulated, the die design of the tee’s multi-directional extrusion forming was completed, and a multi-directional forging process for titanium alloy tees was explored. ...

    Read more

  • Hydraulic forming process of titanium bellows

    Hydraulic forming process of titanium bellows

    According to the test data of chemical composition, mechanical properties and bending properties of titanium (TA9/Grade 7), the manufacturing process and process control of titanium bellows from blanking, welding, heat treatment to compression molding are designed. 0. Introduction ...

    Read more

  • Failure Causes of Titanium Alloy Bends

    Failure Causes of Titanium Alloy Bends

    By means of metallographic microscope, scanning electron microscope and tensile test, the failure causes of TA10 bend used for wastewater treatment were analyzed. The results show that the inner wall of TA10 bend is seriously oxidized. The disappearance of dispersed phase at higher temperature lead ...

    Read more

  • Research on Processing Technology of Titanium Alloy Flange

    Research on Processing Technology of Titanium Alloy Flange

    Flanges are titanium alloy parts, parts material grade DMD0776 equivalent to domestic grade TC6, in the parts of the structure itself is more complex, and there are special processes shot peening process. Procedure, to the reasonable arrangement of the process has increased the difficulty. Therefor ...

    Read more

  • Study on heat tracing design of chemical titanium pipe

    Study on heat tracing design of chemical titanium pipe

    With the continuous development of the times, China’s social economy has shown a high-speed and stable development trend, on the basis of which people’s living standards are constantly improving. China has always attached great importance to the development of the chemical industry, a ...

    Read more

  • What is titanium target

    What is titanium target

    What is titanium target? Titanium target is the target material bombarded by high-speed charged particles. Titanium target is one of the main materials for preparing thin films, which is mainly used in integrated circuits, flat panel displays, solar cells, recording media, smart glass, etc., w ...

    Read more

  • Failure analysis and treatment of titanium tube condenser

    Failure analysis and treatment of titanium tube condenser

    By analyzing the failure causes of titanium tube condenser, the results showed that biological fouling was easily formed during the operation of titanium tube condenser, which led to the deterioration of heat transfer and vacuum drop of the condenser. The biological fouling on the surface of ti ...

    Read more

  • Current status of heat treatment standards for titanium and titanium alloys in china

    Current status of heat treatment standards for titanium and titanium alloys in china

    The classification of heat treatment of titanium and titanium alloys is introduced, and the common standards of heat treatment of titanium and titanium alloys at home and abroad are summarized; This paper analyzes the problems existing in the understanding and application of heat treatment syst ...

    Read more

  • Automatic argon tungsten arc welding process for titanium tube and tube sheet

    Automatic argon tungsten arc welding process for titanium tube and tube sheet

    Through the analysis of weldability, welding protection and reasonable welding specification parameters of titanium tube and titanium tubesheet, and through Mock up simulation test, develop a reasonable automatic tungsten arc welding process parameters and welding bevel form, tube and tube ...

    Read more

Inquery now

SUBSCRIBE TO OUR NEWSLETTER

FOLLOW US

en_USEnglish

Telephone:
8618267732328
Wechat: 8618267732328
Wechat
Whatsapp

  • Email me
    Mail to us
    Skype