Flensa Titanium

Titanium Flange Manufacturer www.titaniuminfogroup.com persediaan Titanium Weld Neck Flange (Titanium WN Flange), Titanium Long Welding Neck Flange (Titanium LWN Flange), Titanium Lap Joint Flange (Titanium LJ Flange), Titanium Blind Flange/Blank Flange (Titanium BL Flange), Titanium Slip On Flange (Titanium SO Flange), Titanium Thread Flange (Titanium TH Flange), Flensa Las Soket Titanium (Titanium SW Flange), Titanium Reducing Flange, Flensa Lubang Titanium, Titanium Anchor Flange, Flensa Buta Tontonan Titanium (Titanium Figue 8 Flange), Cincin Pengatur Jarak Titanium / Flensa Sekop etc.

Standards of Titanium Flange

ANSI/ASME Standard: ANSI B16.5, ANSI B16.47 Series A & B, MSS-SP-44, API 605, API6A in class 150 to 2500;
AWWA C207 flanges in Class B, Class D, Class E, Class F, Ring, Blind & Hub;
European DIN, UNI, EN 1092-1, BS 4504, ISO, NS, NFE29203 flanges in Pressure PN6 to PN100;
Japanese JIS B2220 & Korean KS B1503 flanges in pressure 5K to 40K;
Russian GOST 12820-80, GOST 12821-80, GOST 12815-80 in pressure PN0.6MPa to PN10MPa;
South African SABS 1123 / SANS 1123 in Class 600kPa to 4000kPa.

Materials of Titanium Flange

Titanium Grade 1-4 is pure Titanium, the other grades are alloys. Pure Titanium is used due to its high corrosion resistance, the alloys because of the extremely high strength to weight ratio.
Grade 1. Pure Titanium, relatively low strength and high ductility.
Grade 2. The pure titanium most used. The best combination of strength, ductility and weldability.
Grade 3. High strength Titanium, used for Matrix-plates in shell and tube heat exchangers.
Grade 5. The most manufactured titanium alloy. Exceedingly high strength. High heat resistance.
Grade 7. Superior corrosion resistance in reducing and oxidizing environments.
Grade 9. Very high strength and corrosion resistance..
Grade 12. Better heat resistance than pure Titanium. Applications as for Grade 7 and Grade 11.
Grade 23. Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for surgical implant Applications.

Chemical, Physical And Mechanical Properties
Chemical Composition	ASTM Grade
(Max. Values)	1	2	5	7	9	12	23
N, Nitrogen	0,03	0,03	0,05	0,03	0,02	0,03	0,03
C, Carbon	0,1	0,1	0,1	0,1	0,05	0,08	0,08
H, Hydrogen	0,015	0,015	0,0125	0,015	0,013	0,015	0,0125
Fe, Iron	0,2	0,3	0,4	0,3	0,25	0,3	0,25
O, Oxygen	0,18	0,25	0,20	0,25	0,12	0,25	0.13
Pd, Palladium				0,12-0,25
Al, Aluminum			5,5-6,75		2,5-3,5		5,5-6.5
Mo, Molybdenum						0,2-0,4
V, Vanadium			3,5-4,5		2,0-3,0		3,5-4,5
Ni, Nickel						0,6-0,9
Ti, Titanium	Bal.	Bal.	Bal.	Bal.	Bal.	Bal.	Bal.
MECHANICAL PROPERTIES
Tensile strength, min (Mpa)	240,00	345,00	895,00	345,00	620,00	483,00	828,00
Yield strength, 0,2% Offset, min (Mpa)	170,00	275,00	825,00	275,00	483,00	345,00	759,00
Elongation (in 4D, min, %)	24,00	20,00	10,00	20,00	15,00	18,00	10,00
Reduction of Area, min, %	30,00	30,00	25,00	30,00	25,00	25,00	15,00
Hardness * Interpolated	Rb70	Rb80	Rc36	Rb80	Rc28	Rc17*

Flange Face Type: Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Flange Norminal Diameter Range: 1/2” – 96”, DN15-DN2000
Normail Pressure Range: 150# – 2500# (PN6 – PN40)