Hiina titaanist torustiku lahenduse tarnija: www.titaniuminfogroup.com | Email: sales@titaniuminfogroup.comTel: +8618267732328

Titanium information group | Titaantoru, titaanfitting, titaanventiil, titaanflanšide tootja - www.titaniuminfogroup.com

Titanium Lap Joint Flanges (Titanium LJ Flanges) are used on titanium piping fitted with lapped pipe or with lap joint stub ends the combined initial cost of the two items being approximately one-third higher than that of comparable titanium welding neck flanges. Their pressure-holding ability is little, if any, better than that of titanium slip-on flanges and the fatigue life of the assembly is only one-tenth that of titanium welding neck flanges. The titanium lap joint flange with the stub end assembly are normally used in systems requiring frequent dismantling for inspection and cleaning and where the ability to swivel flanges and to align bolt holes materially eases the erection of large diameter or unusually stiff piping. These titanium flanges are also used in applications where there is a need to facilitate bolt alignment. Their use at points where severe bending stress occurs should be avoided.

Titanium lap joint flange manufacturer www.titaniuminfogroup.com supplies Titanium Lap Joint Flange, Titanium LJ Flanges in materials of titanium, titanium alloy, etc.

Päring nüüd

TELLIGE MEIE UUDISKIRI

JÄLGI MEID

etEesti

Telefon:
8618267732328
Wechat: 8618267732328
Wechat
Whatsapp

  • Saada mulle e-kiri
    Posti meile
    Skype